S-LD is designed to reduce unwanted hair, while Lumirea focuses on the appearance of redness, dark spots, uneven tone, and fine lines. Two distinct technologies, one convenient bundle—bringing more of your at-home beauty needs together.
S-LD Laser Hair Removal Device
96%
Up to 25 J/cm² high energy density, deeper follicle penetration, more efficient treatments, and visibly smoother skin—with up to 96% hair reduction in just 3 sessions.
safe for delicate body zones
Equipped with 5 adjustable energy levels and a diamond-shaped treatment window.
unmatched endurance
Built with high-endurance LED chips for stable performance and at least 5 years of reliable use.
Top View
Front View
Bottom View
Back View
S-LD Laser Hair Removal Device
96%
Up to 25 J/cm² high energy density, deeper follicle penetration, more efficient treatments, and visibly smoother skin—with up to 96% hair reduction in just 3 sessions.
safe for delicate body zones
Equipped with 5 adjustable energy levels and a diamond-shaped treatment window.
unmatched endurance
High-endurance LED chips ensure stable performance for at least 5 years.
Top View
Front View
Bottom View
Back View
Title
Lumirea Dual-Light IPL Photofacial Device
DPL & NIR
DPL (530–650nm) targets redness and pigmentation, while NIR (900–1800nm) promotes collagen regeneration for firmer, youthful-looking skin.
11cm² treatment area
With up to 13J energy delivers faster, more effective results at home. Visible Results in Just 4 Weeks.
sapphire cooling comfort
Cools skin to 41–50°F (5–10°C) to help prevent overheating and keep treatments comfortable.
Front View
Top View
Back View
Bottom View
Lumirea Dual-Light IPL Photofacial Device
DPL & NIR
DPL (530–650nm) targets redness and pigmentation, while NIR (900–1800nm) promotes collagen regeneration for firmer, youthful-looking skin.
11cm² treatment area
With up to 13J energy delivers faster, more effective results at home. Visible Results in Just 4 Weeks.
sapphire cooling comfort
Cools skin to 41–50°F (5–10°C) to help prevent overheating and keep treatments comfortable.
Use Super-Light Emitting Diode single imported chip with 780-850nm wavelength as a light source, crystal guide pyramid shaping and transmission of NIR beam, act on the subcutaneous, melanin in hair follicle absorb heat, to achieve hair removal effect.
How long will ViQure S-LD device take before I start seeing results?
For hair removal, if you operate proper energy level and enough shots number on target skin area, the results can be shown after 1 treatment; the obvious results can be checked after 3 treatment times.
After the whole course of treatment, the hair will not grow in future 1 to 2 years, or only much lighter and thinner hair will grow.
Every facial skin rejuvenation operation will have some results, you can see obvious results after 1 month use.
Is this device safe?
Professional S-LD hair removal machine has passed MDD medical CE certificate and FDA certificate. As personal use model, according power and energy all are designed precisely. The rectangular spot of S-LD light has uniform energy and good consistency, which reduces the tingling sensation during operation, is gentle and comfortable, and makes you fall in love with hair removal and skin rejuvenation treatment.
How often do I need to use ViQure S-LD device?
HR (Hair Removal): The recommended interval between treatments is 40–60 days for the limbs and 20–30 days for the underarms. A full course consists of 4–6 treatments.
SR (Skin Rejuvenation): A full course consists of 6–10 treatments, with one treatment per week. Mild facial warmth is normal. Avoid treating areas with hair or pigmentation, and maintain adequate hydration and sun protection after treatment.
What energy intensity should I choose?
We recommend starting at the lowest energy level and gradually increasing it with each session. If you feel any discomfort, it means the intensity is too high, and the next lower level will likely work best for you.
Do I need to shave before using it?
Yes, shave the area first. Hair above the skin can block the light , reducing effectiveness. Shaving lets the device target the hair follicles directly for safer and better results.
What is Composite Light?
Lumirea uses a composite light output system (DPL + NIR simultaneous emission). This means the device emits two precisely selected spectra at the same time — DPL (530–650 nm) for targeted surface treatment and NIR (900–1800 nm) for deep tissue penetration. The combination and proportion of these wavelengths allow the energy to work at different skin layers, supporting surface repair while promoting deep tightening.
Can the device turn off NIR and use only DPL light?
No. The two light types of Lumirea are not independent channels. They form a coordinated system optimized for energy ratio and wavelength coupling. This design allows a single session to simultaneously target the epidermis (improving pigmentation and brightening skin tone) and the dermis (promoting collagen regeneration and enhancing firmness), achieving more efficient and safer skincare.
Can it cause melasma or burns?
No. The energy of the combined light is precisely controlled, preventing excess heat generation. The sapphire cooling system can reduce the epidermal temperature by approximately 5–10°C in real time, ensuring stable and evenly distributed energy, which avoids heat accumulation and burns. However, it is not recommended for use directly on melasma areas, as thermal reactions may deepen pigmentation or cause post-inflammatory darkening.
Is the entire treatment course painful?
The treatment is comfortable and painless. Lumirea’s sapphire cooling technology continuously lowers the epidermal temperature by 5–10°C during illumination, effectively relieving heat sensation. The treatment energy remains within a safe range, and most users report only a mild warming sensation along with a comfortable tightening effect.
Suitable Skin Tones?
Lumirea is suitable for all skin types. Whether you’re soothing redness, evening tone, or firming skin, Lumirea delivers precise, consistent energy for visible, comfortable results.
Pre- and Post-Treatment Care?
✦ Before Treatment:
1.Confirm suitability: Avoid treating pathological pigmentation, such as melasma or inflammatory spots.
2.Protect sensitive areas: Cover spots, moles, or sensitive skin with protective patches or cotton pads to prevent overexposure.
3.Clean and dry skin: Remove makeup and pat skin dry before treatment to avoid interference with light energy transmission.
✦After Treatment:
1.Immediate soothing and cooling: Apply a chilled mask or ice pack to calm the skin and tighten pores.
2.Avoid heat stimulation: Do not use hot water on the face, saunas, or intense exercise within 24 hours to prevent redness or dryness.
3.Strict sun protection: Apply sunscreen (SPF 30+) when going outdoors, and use a hat or umbrella to prevent pigmentation rebound.
4.Maintain hydration and repair: Enhance moisturizing for 3–7 days using gentle hydrating serums or masks to maintain skin barrier stability.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
